-
TELESCOPIC CAMERA TOWER
Product Description:
The ST-TCT series lifting columns have a unique design for the stiffness and strength of the column. Level 8 winds will not damage the normal operation of the self-standing columns . Since there is no need for wind rope protection, the erection time is greatly shortened, the erection personnel are reduced, the requirements for the use site are reduced , and the system’s rapid response capability is improved. The product adopts: ladder screw drive, the lifting process is smooth and reliable, and it can self-lock at any position. The circular cross-section cylinder has good guiding properties, and the cylinder has good bending and torsion resistance. Under the same conditions, it has smaller sway and lower torsion angle than other forms of lifting columns . The electric column is linked to lift and is compatible with manual lift and wireless remote control. Rubber sealing rings are used between columns to improve the waterproof, sandproof and ice-proof performance of the lifting column . The cylinder is hard anodized and has good anti-corrosion properties.
types of electric lifting column control: standard type and intelligent type . The standard type only provides “raising, lowering and stopping” operating functions.
Product Description :
ST-TCT-10 series lifting columns are elevated equipment carriers, suitable for land, vehicle, or ship mounting. It can quickly, reliably and safely raise communication antennas, lighting, lightning protection, optical transmission and camera equipment to a predetermined height. It has strong wind and impact resistance and a wide range of uses.
specification:
Lifting power
electric
unfolded height
10m
closing height
2.5m
load bearing
50kg
control method
Wired and wireless remote control
Remote control distance
≥50 meters
Material
Aluminum shell
safety
Stop at any height and there will be no loss of altitude.
System working voltage
AC220V
environmental adaptability project
Test conditions
Wind resistance
Level 8 winds work normally and level 12 winds do not cause damage. GJB74A-1998 3.13.13
low temperature work
-40°
High temperature work
+65 °
humidity
Less than 90% (temperature 25°)
caught in the rain
Intensity 6mm/min, duration 1h
-
Gyroscope Robot ST-2100
Dolly and pedestal
Max moving speed 3m/s
Max up and down speed 0.6m/s
Up and down（m）1.1-1.9
Max Track length 100m
Track width 0.5m
Base width 0.6m
Camera Robot dolly Max payload 200Kg
overall weight≤100Kg
conroling distance 1000m
System energy
stable electricity DC24 or AC220V
Energy consumption≤1Kw
System characteristic
preset position 20pcs
virtual input: optional
Remote head
interface CAN RS-485
remote head pan 360°
remote head tilt±80°
remote head side rotating ±40°
Max angle 90°/s
stability accuracy≤80 micro arc
remote head payload ≤30Kg
data output：FREE-D
