Andy Telescopic Crane with Andy crane functionality is the world’s first and only telescopic camera crane in production capable of a vertical telescopic movement with a tilt range from -25 degrees to true 90 degree vertical. It’s unique foldable Yoke allows it to transform from a standard telescopic crane with a symmetrical tilt angle range to a Andy Crane with reduced downward tilt range and vertical capability.

This increased capabilities allow the crane to shoot previously impossible shots in tight places, narrow staircases etc. The foldable Yoke allows the operator a smooth tilt movement from -25 to 90 degrees and full uninterrupted pan movement.

The Andy Crane is based on our standard Andy Standard: a lightweight and agile two-section telescopic camera crane. It’s small size and robust construction make it a versatile crane capable of being mounted on a number of platforms including the all new Andy scissor dolly, a heavy duty camera dolly, an electric camera car etc. The crane features novel triangular cross section with an innovative three-point guide rail system which, together with extruded aluminum sections make it a highly stable and robust platform capable of withstanding stresses and shocks while moving on a vehicle. It can be powered with a standard 48V battery pack or 110-240V AC (using an included AC/DC power supply unit).

The Andy crane also features a new leveling head with over-slung and under-slung capability, buttons for adjustable level offset and optional Gyroscopic Leveling Add-on [GLA]. The optional all-new Andy scissor dolly with folding arms allows to change the width for different track systems. In its most compact configuration it allows to move the crane through small office doors (0,8m).

What is a Jib?

In cinematography, a jib is a boom device with a camera on one end and a counterweight and camera controls at the other. It operates like a see-saw with a fulcrum in the center. A jib is useful for getting high shots, or shots that need to move a great distance; horizontally or vertically, without the expense and safety issues of putting a camera operator on a crane. The camera is controlled by a cabled remote control at one end, and at the other a super-responsive electro mechanic pan/tilt head (hot head) – allowing for smooth pans and tilts. 

How long does it take to set up a Andy Telescopic Jib?

We will always ask you to allow one hour for a Telescopic Jib to be set up on a flat surfaced area, yet the Telescopic Jib is usually ready for operation in forty-five minutes. If the location is more hazardous, more time is required. It also takes around ten minutes to fit and balance the camera on the hothead.